Mop Sets

Included

• 2x damp mop heads
• 1x telescopic handle
• 1x mop base

How good are microfibre mops? 

Microfibre mops are super efficient at removing dirt and grime from rigid, wooden laminate and tiling floors. These damp mops work with capillary action, which draws soiling into the mop, effectively cleaning the area with ease. In addition, there is no need to use chemicals on lightly soiled floors. Also, our mop heads can be laundered up to 500 times, making them far better for the environment than disposable mops. Finally, our mops have a velcro fixing making it super easy to change mop heads. 

What are the benefits of microfibre mops

• Highly Absorbent 
• No need to use chemicals on lightly soiled floors.
• Capillary action when used damp which draws soiling into the mop
• Soft material ideal for sensitive surfaces 
• Velcro fixing 
• Can be laundered up to 500 times
• Quick to dry 
• Lightweight
• Slim, can fit under furniture

Which size best suits your needs 

This depends on the surface area you will regularly be cleaning. For small houses or offices etc., we recommend the 50 x 15; for larger homes, you may require the 60 x 15 cm. 

How to use

We have designed our mops for extreme ease of use. Our mop handles have a universal joint which attaches to our bases, and the bottom of the base has velcro strips which allow for easy mop head instalment.  The mop heads are more significant than the base to allow good cleaning into the area where skirting meets flooring. Mopping should be carried out in a figure of 8 to ensure collected waste is on the leading edge of the mop.

Sizes: 50 x 15 CM | 60 x 15 CM

Pack Size: 2 Mop Heads, 1 Mop Base, 1 Telescopic Handle

Materials: Aluminium, 70% Polyester, 30% Polyamide

There's nothing worse than cleaning with a microfibre products that leaves fabric lints everywhere. The cause of this is poor manufacturing. Microfibre fabric requires 'splitting', which breaks down the fibres allowing the material to become soft, fine and absorbent. However, when the machinery & caustic soda splits the fibre too much, the cloth will slowly break down and lint. We work with the highest graded machinery to ensure this does not happen with ours. 

We recommend washing our mop heads at around 40 degrees Celsius. Our mop heads allow washing up to 95 degrees Celsius. However, shrinkage will occur in the initial few washes, up to 5%.

Our mop heads can be tumbled-dried, which can be beneficial as it opens the fibres.

Ensure you wash our darker colours on their own on the first couple of washes, as the dye may bleed.

Do not use any fabric softeners/conditions when washing.